Windows Server 2003 Network MCSE 70-291

Exam : Microsoft 70-680

Title : TS: Windows 7, Configuring

37. You have a computer that runs Windows 7.

You create a HomeGroup.

You need to secure the HomeGroup to meet the following requirements:

Allow access to the HomeGroup when you are connected to private networks

Block access to the HomeGroup when you are connected to public networks

What should you do?

A. From Network and Sharing Center, modify the advanced sharing settings.

B. From the HomeGroup settings in Control Panel, modify the advanced sharing settings.

C. Configure the HomeGroup exception in Windows Firewall to include Home or work (private) networks and block Public networks.

D. Configure the File and Printer Sharing exception in Windows Firewall to include Home or work (private) networks and block Public networks.

Answer: C

38. You have two computers named Computer1 and Computer2 that run Windows 7.

You need to ensure that you can remotely execute commands on Computer2 from Computer1.

What should you do?

A. Run Winrm quickconfig on Computer1.

B. Run Winrm quickconfig on Computer2.

C. Enable Windows Remote Management (WinRM) through Windows Firewall on Computer1.

D. Enable Windows Remote Management (WinRM) through Windows Firewall on Computer2.

Answer: B

39. You have a workgroup that contains five computers. The computers run Windows 7.

A computer named Computer1 has video and audio files.

You need to share Computer1’s video and audio files on the network.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. Create a HomeGroup.

B. Move the files to a Media Library.

C. Enable all BranchCache rules in Windows Firewall.

D. Connect a removable drive and enable BitLocker To Go.

Answer: AB

40. You have a computer that runs Windows 7.

A printer is installed on the computer.

You remove the Everyone group from the access control list (ACL) for the printer, and then you share the printer.

You need to ensure that members of the Sales group can modify all the print jobs that they submit. You must prevent Sales group members from modifying the print jobs of other users.

What should you do?

A. From the printer’s properties, assign the Print permission to the Sales group.

B. From the printer’s properties, assign the Manage Documents permission to the Sales group.

C. From the local Group Policy, assign the Increase scheduling priority user right to the Sales group.

D. From the local Group Policy, assign the Take ownership of files or other objects user right to the Sales group.

Answer: A

41. A user named User1 uses a shared computer that runs Windows 7. User1 is a member of group named Group1.

The computer contains a folder named Folder1.

You need to configure the permissions on Folder1 to meet the following requirements:

User1 must be allowed to delete all files in Folder1

Members of Group1 must be able to create files in Folder1

All other members of Group1 must be prevented from deleting files they did not create in Folder1

All users must be prevented from modifying the permissions on Folder1

What should you do?

A. Assign Group1 the Write permission. Assign User1 the Modify permission.

B. Assign Group1 the Modify permission. Assign User1 the Write permission.

C. Deny Group1 the Write permission. Assign User1 the Modify permission.

D. Deny Group1 the Modify permission. Assign User1 the Write permission.

Answer: A

42. You have a computer that runs Windows 7.

Multiple users log on to your computer.

You enable auditing on a folder stored on your computer.

You need to ensure that each access to the folder is logged.

What should you do?

A. Start the Problem Steps Recorder.

B. From Event Viewer, modify the properties of the Security log.

C. From the local Group Policy, configure the Audit object access setting.

D. From the local Group Policy, configure the Audit directory service Access setting.

Answer: C

43. You have a standalone computer that runs Windows 7.

You need to prevent non-administrative users from using Device Manager. Users must be able to access Event Viewer.

What should you do?

A. From Control Panel, modify the default settings for media and devices.

B. From Control Panel, modify the default settings for device installation.

C. From the local computer policy, modify the application control policies.

D. From the local computer policy, modify the Microsoft Management Console (MMC) settings.

Answer: D

44. You have a computer that runs Windows 7.

You run Runas and specify the /savecred parameter to start an application.

You need to delete the stored password.

What should you do?

A. Run Del and specify the /p parameter.

B. Run Runas and specify the /noprofile parameter.

C. From Credential Manager, modify the Windows credentials.

D. From Authorization Manager, modify the Authorization Manager options.

Answer: C

45. Your company has an internal Web site that requires HTTPS. The Web site’s certificate is self-signed.

You have a computer that runs Windows 7 and Windows Internet Explorer 8.

You use HTTPS to browse to the Web site and receive the following warning message.There is a problem with this website’s security certificate.

You need to prevent the warning message from appearing when you access the Web site.

What should you do?

A. From Internet Explorer, enable InPrivate Browsing.

B. From Internet Explorer, add the Web site to the Trusted sites zone.

C. From Certificate Manager, import the Web sites certificate into your Personal store.

D. From Certificate Manager, import the Web sites certificate into your Trusted Root Certification Authorities store.

Answer: D

46. Your network has a main office and a branch office.

The branch office has five client computers that run Windows 7. All client computers are configured to use BranchCache.

At the branch office, a computer named Computer1 is experiencing performance issues.

You need to temporarily prevent all computers from retrieving cached content from Computer1.

What should you do on Computer1?

A. At the command prompt, run Netsh branchcache flush.

B. At the command prompt, run Netsh branchcache dump.

C. Modify the Configure BranchCache for network files Group Policy setting.

D. Modify the Set percentage of disk space used for client computer cache Group Policy setting.

Answer: A

47. You have a computer that runs Windows 7.

You need to prevent users from copying unencrypted files to removable drives.

What should you do?

A. From the Trusted Platform Module (TPM) snap-in, initialize TPM.

B. From Control Panel, modify the BitLocker Drive Encryption settings.

C. From a local Group Policy, modify the BitLocker Drive Encryption settings.

D. From a local Group Policy, modify the Trusted Platform Module (TPM) settings.

Answer: C

48. You have a standalone computer that runs Windows 7. Multiple users share the computer.

You need to ensure that you can read the content of all encrypted files on the computer.

What should you do?

A. Run the Certificates Enrollment wizard and then run Certutil.exe ¨Cimportpfx.

B. Run the Certificates Enrollment wizard and then run Certutil.exe ¨Cinstallcert.

C. Run Cipher.exe /r and then add a data recovery agent from the local security policy.

D. Run Cipher.exe /rekey and then import a security template from the local security policy.

Answer: C

49. Your network consists of an Active Directory domain and a DirectAccess infrastructure.

You install Windows 7 on a new portable computer and join the computer to the domain.

You need to ensure that the computer can establish DirectAccess connections.

What should you do?

A. Install a computer certificate.

B. Create a new network connection.

C. Enable the Network Discovery firewall exception.

D. Add the computer account to the Network Configuration Operators group.

Answer: A

50. You have a portable computer named Computer1 that runs Windows 7.

You have a file server named Server1 that runs Windows Server 2008. Server1 contains a shared folder named Share1.

You need to configure Computer1 to meet the following requirements:

Ensure that cached files from Share1 are encrypted.

Ensure that files located in Share1 are available when Server1 is disconnected from the network.

What should you do?

A. On Server1, encrypt the files in Share1. On Computer1, make Share1 available offline.

B. On Server1, configure BitLocker Drive Encryption. On Computer1, make Share1 available offline.

C. On Computer1, make Share1 available offline and enable encryption of offline files.

D. On Computer1, copy the files from Share1 to the Documents library and configure BitLocker Drive Encryption.

Answer: C

51. Your network contains an Active Directory domain. All servers run Windows Server 2008 R2 and are members of the domain. All servers are located in the main office.

You have a portable computer named Computer1 that runs Windows 7. Computer1 is joined to the domain and is located in a branch office.

A file server named Server1 contains a shared folder named Share1.

You need to configure Computer1 to meet the following requirements:

Minimize network traffic between the main office and the branch office

Ensure that Computer1 can only access resources in Share1 while it is connected to the network

What should you do?

A. On Computer1, enable offline files.

B. On Computer1, enable transparent caching.

C. On Server1, configure DirectAccess.

D. On Server1, configure Share1 to be available offline.

Answer: B

52. You have a computer that runs Windows 7. The computer connects to the corporate network by using a VPN connection.

You need to ensure that you can access the Internet when the VPN connection is active. The solution must prevent Internet traffic from being routed through the VPN connection.

What should you do?

A. Configure a static DNS server address.

B. Configure a static IP address and default gateway.

C. Configure the security settings of the VPN connection.

D. Configure the advanced TCP/IP settings of the VPN connection.

Answer: D

53. You have a computer that runs Windows 7.

Your network contains a DHCP server that runs Windows Server 2008 R2. The server is configured as a Network Access Protection (NAP) enforcement point.

You need to configure the computer as a NAP client.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. From Services, set the Netlogon service Startup Type to Automatic.

B. From Services, set the Network Access Protection Agent service Startup Type to Automatic.

C. From the NAP Client Configuration console, configure the user interface settings.

D. From the NAP Client Configuration console, enable the DHCP Quarantine Enforcement Client.

Answer: BD

54. You have two computers named Computer1 and Computer2 that run Windows 7. Both computers are members of an Active Directory domain.

Windows Remote Management (WinRM) is enabled on both computers.

You need to remotely create additional disk volumes on Computer1 from Computer2.

What should you do?

A. On Computer2, run Winrs and then run Diskpart.

B. On Computer2, run Winrs and then run Diskmgmt.msc.

C. On Computer1, install the Telnet Client and then run Diskpart from Computer2.

D. On Computer1, install the Telnet Client and then use Disk Management from Computer2.

Answer: A

55. A remote user has a computer that runs Windows 7.

The user reports that he receives several error messages while using an application.

You do not have remote access to the user’s computer.

You need to tell the user how to create screenshots of the actions he performs on the computer. The solution must track the mouse actions that the user performs.

What should you instruct the user to do?

A. Press ALT+PrintScreen.

B. Run Psr.exe and then click Start Record.

C. From Mouse Properties, select Display pointer trails.

D. Run Snippingtool.exe, click New, and then click Window Snip.

Answer: B

56. You need to increase the size of a paging file.

What should you do?

A. From Disk Management, shrink the boot partition.

B. From Disk Management, shrink the system partition.

C. From System, modify the Advanced system settings.

D. From System, modify the System protection settings.

Answer: C

57. You have a computer that runs Windows 7. You perform regular data backups and system image backups.

The computer experiences a hard disk failure. You replace the failed hard disk.

You need to recover the computer to the previous Windows 7 environment.

You start the computer from the Windows 7 installation media.

Which recover option should you select?

A. Command Prompt

B. Startup Repair

C. System Image Recovery

D. System Restore

Answer: C

58. You have a computer that runs Windows Vista (x86).

You need to perform a clean installation of Windows 7 (64-bit).

What should you do?

A. From the Windows 7 installation media, run Rollback.exe.

B. From the Windows 7 installation media, run Migsetup.exe.

C. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Upgrade option.

D. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Custom (advanced) option.

Answer: D

59. You have a computer that runs Windows XP Service Pack 2 (SP2).

You need to upgrade the operating system to Windows 7. You must achieve this goal in the minimum amount of time.

What should you do?

A. Upgrade to Windows Vista SP2. From the Windows 7 installation media, run Setup.exe and select the Upgrade option.

B. Upgrade to Windows Vista SP2. From the Windows 7 installation media, run Setup.exe and select the Custom (advanced) option.

C. Install Windows XP Service Pack 3 (SP3). Run Setup.exe from the Windows 7 installation media and select the Upgrade option.

D. Install Windows XP Service Pack 3 (SP3). Run Setup.exe from the Windows 7 installation media and select the Custom (advanced) option.

Answer: A

60. Your network consists of a single Active Directory forest.

You have 50 portable computers and 50 desktop computers. All computers have 32-bit hardware.

You plan to deploy Windows 7 and 10 corporate applications to the computers by using a custom image.

You need to prepare for the deployment by using the minimum amount of administrative effort.

What should you do first?

A. On one computer, install Windows 7 and the corporate applications.

B. On one portable computer and one desktop computer, install Windows 7 and the corporate applications.

C. On a server, install and run the Microsoft Assessment and Planning (MAP) Toolkit.

D. On a server, install the Windows Automated Installation Kit (AIK) and run Windows System Image Manager (Windows SIM).

Answer: A

61. You have a computer that runs Windows 7.

You need to copy files to a virtual hard disk (VHD) file.

What should you do first?

A. Run Dism.exe and specify the /image and /online parameters.

B. Open Windows Explorer, right-click the VHD file and select Open.

C. Run Diskpart.exe and then run the Select and Attach commands.

D. Run Imagex.exe and specify the /mountrw and /append parameters.

Answer: C

62. You have a computer that runs Windows 7.

You create an application shim for a third-party application by using the Microsoft Application Compatibility Toolkit (ACT).

You need to ensure that the application shim is applied the next time you run the application.

What should you do first?

A. Run Sdbinst.exe.

B. Run Msiexec.exe.

C. Right-click the application executable file and modify the compatibility settings.

D. Right-click the application executable file and modify the advanced security settings.

Answer: A

63. You have a computer that runs Windows 7. Multiple users log on to the computer.

The computer has five removable devices.

You need to ensure that users can only access removable devices that have been previously installed on the computer.

What should you modify in the Local Group Policy?

A. Enable the Prevent redirection of USB devices setting.

B. Enable the Prevent installation of removable devices setting.

C. Disable the WPD Devices: Deny read access setting.

D. Disable the Allow administrators to override Device Installation Restriction policies setting.

Answer: B

64. Your network consists of a single Active Directory domain named contoso.com.

You have a server named Server1 that runs a custom network application.

Server1 has the following IP addresses:

·192.168.15.10

·192.168.15.11

You need to ensure that a client computer resolves server1.contoso.com to only the 192.168.15.11 IP address.

What should you do from the computer?

A. Edit the hosts file.

B. Edit the lmhosts file.

C. Run Ipconfig.exe /flushdns.

D. Run Netsh interface ipv4 reset.

Answer: A

65. You have a computer named Computer1 that runs Windows 7. Computer1 is a member of an Active Directory domain. Remote Desktop is enabled on the computer.

You share a folder on Computer1.

You need to configure Computer1 to meet the following requirements:

·Allow computers in the local subnet to access the shared folder

·Prevent computers in remote subnets from accessing the shared folder

·Allow all computers to connect to Computer1 by using Remote Desktop

What should you do?

A. Modify the subnet mask.

B. Modify the Public folder sharing settings.

C. Disable network discovery on all computers located in remote subnets.

D. Modify the properties of the File and Printer Sharing firewall exceptions.

Answer: D

66. You have a computer that runs Windows 7.

You attempt to add files to %programfiles%\app1 and receive a prompt to elevate your privileges.

You need to ensure that you can add files to %programfiles%\app1 without receiving a prompt for elevated privileges. The solution must prevent harmful applications from making unwanted changed to the system.

What should you do?

A. Enable the built-in administrator account.

B. Modify the User Account Control (UAC) settings.

C. Add your user account to the local Power Users group.

D. Modify the permissions of the %programfiles%\app1 folder.

Answer: D

67. You have a computer named Computer1 that runs Windows 7. The computer is a member of an Active Directory domain. The network contains a file server named Server1 that runs Windows Server 2008.

You log on to the computer by using an account named User1.

You need to ensure that when you connect to Server1, you authenticate by using an account named Admin1.

What should you do on Computer1?

A. From User Accounts, select Link online IDs.

B. From Windows CardSpace, select Add a card.

C. From Credential Manager, select Add a Windows credential.

D. From Local Security Policy, modify the Access this computer from the network user right.

Answer: C

68. Your network has a main office and a branch office.

The branch office has five client computers that run Windows 7. All servers are located in the main office. All servers have BranchCache enabled.

Users at the branch office report that it takes several minutes to open large files located in the main office.

You need to minimize the amount of time it takes for branch office users to open files located in the main office. The solution must also reduce the amount of bandwidth used between the two offices.

What should you do?

A. At the main office, configure the Quality of Service (QoS) Packet Scheduler on all servers.

B. At the main office, configure the servers to use Background Intelligent Transfer Service (BITS).

C. At the branch office, configure the client computers to use BranchCache Hosted Cache mode.

D. At the branch office, configure the client computers to use BranchCache Distributed Cache mode.

Answer: D

69. You have a portable computer that runs Windows 7. You configure the computer to enter sleep mode after 10 minutes of inactivity.

You do not use the computer for 15 minutes and discover that the computer has not entered sleep mode.

You need to identify what is preventing the computer from entering sleep mode.

What should you do?

A. At a command prompt, run Powercfg –energy.

B. At a command prompt, run Systeminfo /s localhost.

C. From Performance Monitor, review the System Summary.

D. From Performance Information and Tools, review the detailed performance and system information.

Answer: A

70. You have a computer that runs Windows 7.

Your network contains a VPN server that runs Windows Server 2008.

You need to authenticate to the VPN server by using a smart card.

Which authentication setting should you choose?

A. CHAP

B. EAP

C. MS-CHAP v2

D. PAP

Answer: B

Exam : Microsoft 70-680

Title : TS: Windows 7, Configuring

13. You have a computer named Computer1 that runs Windows Vista and a computer named Computer2 that runs Windows 7.

You plan to migrate all profiles and user files from Computer1 to Computer2.

You need to identify how much space is required to complete the migration.

What should you do?

A. On Computer1 run Loadstate c:\store /nocompress

B. On Computer1 run Scanstate c:\store /nocompress /p

C. On Computer2 run Loadstate \\computer1\store /nocompress

D. On Computer2 run Scanstate \\computer1\store /nocompress /p

Answer: B

14. You have a computer that runs Windows Vista. The computer contains a custom application.

You need to export the user state and the settings of the custom application.

What should you do?

A. Run Loadstate.exe and specify the /config parameter.

B. Run Scanstate.exe and specify the /genconfig parameter.

C. Modify the miguser.xml file. Run Loadstate.exe and specify the /ui parameter.

D. Modify the migapp.xml file. Run Scanstate.exe and specify the /i parameter.

Answer: D

15. You have a reference computer that runs Windows 7.

You plan to deploy an image of the computer.

You create an answer file named answer.xml.

You need to ensure that the installation applies the answer file after you deploy the image.

Which command should you run before you capture the image?

A. Imagex.exe /append answer.xml /check

B. Imagex.exe /mount answer.xml /verify

C. Sysprep.exe /reboot /audit /unattend:answer.xml

D. Sysprep.exe /generalize /oobe /unattend:answer.xml

Answer: D

16. You plan to deploy Windows 7 to 100 computers on your corporate network.

You install Windows 7 on a computer.

You and need to prepare the computer to be imaged.

What should you do before you create the image of the computer?

A. At the command prompt, run the Dism command.

B. At the command prompt, run the Sysprep command.

C. Start the computer from the Windows Preinstallation Environment (Windows PE) and then run the Imagex command.

D. Start the computer from the Windows Preinstallation Environment (Windows PE) and then run the Wpeutil command.

Answer: B

17. You have a computer that runs Windows 7.

You need to configure the computer to meet the following requirements:

Generate a new security ID (SID) when the computer starts.

Ensure that the Welcome screen appears when the computer starts.

What should you do?

A. Run Sysprep.exe /oobe /generalize.

B. Run Sysprep.exe /audit /generalize.

C. Run Msconfig.exe and select Selective startup.

D. Run Msconfig.exe and select Diagnostic startup.

Answer: A

18. You have a reference computer that runs Windows 7.

You plan to create an image of the computer and then deploy the image to 100 computers.

You need to prepare the reference computer for imaging.

What should you do before you create the image?

A. Run Package Manager.

B. Run the System Preparation tool.

C. Install the User State Migration Tool.

D. Install Windows Automated Installation Kit.

Answer: B

19. You start a computer by using Windows Preinstallation Environment (Windows PE).

You need to dynamically load a network adapter device driver in Windows PE.

What should you do?

A. Run Peimg.exe and specify the device driver path.

B. Run Drvload.exe and specify the device driver path.

C. Run Winpeshl.exe and specify a custom Winpeshl.ini file.

D. Run Wpeutil.exe and specify the InitializeNetwork command.

Answer: B

20. You plan to install Windows 7 by using a Windows 7 DVD.

You need to perform an automated installation of Windows 7.

What should you do?

A. Create an answer file named oobe.xml. Copy the file to a network share.

B. Create an answer file named winnt.sif. Place the file on a removable drive.

C. Create an answer file named sysprep.inf. Copy the file to a network share.

D. Create an answer file named autounattend.xml. Place the file on a removable drive.

Answer: D

21. You have a Virtual Hard Disk (VHD) and a computer that runs Windows 7. The VHD has Windows 7 installed.

You need to start the computer from the VHD.

What should you do?

A. From Diskpart.exe, run Select vdisk.

B. From Disk Management, modify the active partition.

C. Run Bootcfg.exe and specify the /default parameter.

D. Run Bcdedit.exe and modify the Windows Boot Manager settings.

Answer: D

22. You have a new computer that does not have an operating system installed.

You have a virtual hard disk (VHD) that contains an installation of Windows 7.

You start the computer from the Windows Preinstallation Environment (Windows PE). You create a partition on the computer and copy the VHD to the partition.

You need to configure the computer to start from the VHD.

Which tools should you use?

A. Diskpart.exe and Bcdboot.exe

B. Imagex.exe and Bcdedit.exe

C. Scanstate.exe and Loadstate.exe

D. Wpeutil.exe and Dism.exe

Answer: A

23. Your have a computer that runs Windows 7.

You need to confirm that all device drivers installed on the computer are digitally signed.

What should you do?

A. At a command prompt, run Verify.

B. At a command prompt, run Sigverif.exe.

C. From Device Manager, click Scan for hardware changes.

D. From Device Manager, select the Devices by connection view.

Answer: B

24. You have a computer that runs Windows 7.

Multiple users log on to the computer.

You need to deny one user access to removable devices on the computer. All other users must have access to the removable drives.

What should you do?

A. From the local Group Policy, modify an application control policy.

B. From Control Panel, modify the BitLocker Drive Encryption settings.

C. From Device Manager, modify the settings of all removable devices.

D. From the local Group Policy, modify a removable storage access policy.

Answer: D

25. You have a computer that runs Windows 7.

You need to modify the file extensions that are associated to Internet Explorer.

What should you do?

A. From Internet Explorer, click Tools and then click Manage Add-ons.

B. From Control Panel, open Default Programs and then click Set Associations.

C. From the local Group Policy, expand Computer Configuration and then click Software Settings.

D. From Window Explorer, right-click %programfiles%\Internet Explorer\iexplore.exe and then click Properties.

Answer: B

26. Your network contains 100 computers that run Windows XP.

You need to identify which applications installed on all of the computers can run on Windows 7.

You must achieve this goal by using the minimum amount of administrative effort.

What should you install?

A. Microsoft Application Compatibility Toolkit (ACT)

B. Microsoft Assessment and Planning (MAP) Toolkit

C. Microsoft Deployment Toolkit (MDT)

D. Windows Automated Installation Kit (AIK)

Answer: A

27. You have a stand-alone computer named Computer1 that runs Windows 7. Several users share Computer1.

You need to prevent all users who are members of a group named Group1 from running Windows Media Player. All other users must be allowed to run Windows Media Player. You must achieve this goal by using the least amount of administrative effort.

What should you do?

A. From Software Restriction Policies, create a path rule.

B. From Software Restriction Policies, create a hash rule.

C. From Application Control Policies, create the default rules.

D. From Application Control Policies, create an executable rule.

Answer: D

28. You have a computer that runs Windows 7.

Your company has three custom applications named app1.exe, app2.exe, and app3.exe. The applications have been digitally signed by the company.

You need to create a policy that allows only applications that have been digitally-signed by the company to run.

What should you create?

A. an AppLocker executable rule

B. an AppLocker Windows Installer rule

C. a software restriction policy and a certificate rule

D. a software restriction policy and a hash rule

Answer: A

29. You have a computer that runs Windows 7.

You need to prevent Internet Explorer from saving any data during a browsing session.

What should you do?

A. Disable the BranchCache service.

B. Modify the InPrivate Blocking list.

C. Open an InPrivate Browsing session.

D. Modify the security settings for the Internet zone.

Answer: C

30. Your company has an Active Directory domain. All computers are members of the domain.

Your network contains an internal Web site that uses Integrated Windows Authentication.

From a computer that runs Windows 7, you attempt to connect to the Web site and are prompted for authentication.

You verify that your user account has permission to access the Web site.

You need to ensure that you are automatically authenticated when you connect to the Web site.

What should you do?

A. Create a complex password for your user account.

B. Open Credential Manager and modify your credentials.

C. Add the URL of the Web site to the Trusted sites zone.

D. Add the URL of the Web site to the Local intranet zone.

Answer: D

31. Your network consists of a single IPv4 subnet. The subnet contains 20 computers that run Windows 7.

You add a new computer named Computer1 to the subnet.

You discover that Computer1 has an IP address of 169.254.34.12.

You cannot connect to other computers on the network. Other computers on the network can connect to each other.

You need to ensure that you can connect to all computers on the network.

What should you do?

A. Turn off Windows Firewall.

B. Run Ipconfig.exe /renew.

C. Configure a static TCP/IP address.

D. Run Netsh.exe interface ipv4 install.

Answer: C

32. You have a computer that runs Windows 7.

The IPv6 address of the computer is configured automatically.

You need to identify the IPV6 address of the computer.

What should you do?

A. At the command prompt, run Netstat.

B. At the command prompt run Net config.

C. From the network connection status, click Details.

D. From network connection properties, select Internet Protocol Version 6 (TCP/IPv6) and click Properties.

Answer: C

33. Your network consists of an Active Directory domain named contoso.com. You have a computer named computer1.contoso.com.

Your network is configured to use only IPv6.

You need to request that a DNS record be created to enable users to connect to your computer by using the name dev.contoso.com.

Which type of record should you request?

A. A

B. AAAA

C. HINFO

D. NAPTR

Answer: B

34. Your network contains a wireless access point. You have a computer that runs Windows 7. The computer connects to the wireless access point.

You disable Service Set Identifier (SSID) broadcasts on the wireless access point.

You discover that you are now unable to connect to the wireless access point from the Windows 7 computer.

You need to ensure that the computer can connect to the wireless access point.

What should you do?

A. From Credential Manager, modify the generic credentials.

B. From Credential Manager, modify the Windows credentials.

C. From Network and Sharing Center, turn on Network discovery.

D. From Network and Sharing Center, modify the wireless network connection setting.

Answer: D

35. You have a wireless access point that is configured to use Advanced Encryption Standard (AES) security. A pre-shared key is not configured on the wireless access point.

You need to connect a computer that runs Windows 7 to the wireless access point.

Which security setting should you select for the wireless connection?

A. 802.1x

B. WPA-Personal

C. WPA2-Enterprise

D. WPA2-Personal

Answer: C

36. You have a computer named Computer1 that runs Windows 7.

You need to ensure that Computer1 can connect to File Transfer Protocol (FTP) servers only while it is connected to a private network.

What should you do?

A. From Windows Firewall with Advanced Security, create a new rule.

B. From the local Group Policy, modify the application control policies.

C. From Windows Firewall, modify the Allowed Programs and Features list.

D. From Network and Sharing Center, modify the Advanced Sharing settings.

Answer: A